Meteogram Pro Weather Widget 5.0.9

version 5.0.9

5.0.9:
• Apple has finally pulled the plug on the DarkSky API :-( so there is no choice now but to remove the DarkSky provider as an option in this app
• the Apple Weather provider was added as a new choice a few months ago, in anticipation of the loss of DarkSky, so perhaps try the Apple Weather provider instead?
• various translation and dependency updates

version 5.0.8

5.0.8:
• when choosing a provider for a specific variable, rather than just showing "Main Data Provider" in the drop-down it will also show what the currently-selected "main data provider" actually is
• this should help because the main data provider is set in different section, and you may not recall what it is currently set to
5.0.7:
• add "inch" as an option for precipitation unit
• fix email app not opening for some users
5.0.6:
• add millibar (mb) as a choice for pressure unit

version 4.7.28

4.8.0:
. new weather data provider: Australian Bureau of Meteorology (BOM)
. covers Australia only
. provides hourly data up to 72 hours (3 days) ahead
. available variables: temperature, feels like, precipitation (separate min and max values), precipitation probability, wind speed, wind gust, wind direction, and weather symbols
4.7.27:
. new variables: Precipitation Totals, Snow Totals, and Sunshine Totals
4.7.26:
. show moon phase in the header in both numerical *and* symbol format

version 4.7.26

4.7.26:
. option to show moon phase in the header in both numerical format *and* symbol format (previously only one or the other was possible)
. the moon phase symbol is now more realistic, showing both the angle of lunar illumination as well as the amount
. attempted fix for rare instance of early termination of widget refresh with large number of widgets active
4.7.24:
. lots of new axis-related options to allow you to customise the display of axis labels and grid lines for each variable

version 4.7.25

4.7.25:
. internal improvements and library updates
4.7.24:
. set various axis-related options (e.g. axis min/max/padding) either independently or (as before) linked to a related axis
. option for fixed spacing between grid lines / axis labels
. option to enable/disable grid lines
. option to show all axis labels (or just those in range)
. option to shift axis labels left/right to fine-tune
. fix showing of notification after a device restart
. fix widget not reverting to detect location

version 4.7.24

4.7.24:
. set various axis-related options (e.g. axis min/max, axis padding, etc) either independently or (as before) linked to a related axis
. e.g. set up snow differently to rain
. option for fixed spacing between grid lines / axis labels
. option to enable/disable grid lines
. option to show all axis labels (or just those in range)
. option to shift axis labels left/right to fine-tune
. fix showing of notification after a device restart
. fix widget not reverting to detect location

version 4.7.23

4.7.23:
. new "line spacing" option in Header Information section to adjust the spacing between lines in a multi-line header
. new "line break" elements in Header Information section
. new options for each variable to choose whether to place axis labels on the right or the left, and inside or outside the chart area
. fix tag text not sticking in Save to Server section (for some)
4.7.20-22:
. "colour scale" now available for all variables
. drag/drop in settings page to re-order

version 4.7.22

4.7.21-22:
. "colour scale" is now available as an option for all variables
. e.g. use red for high values and green for low values, for a visual indication of scale
. get creative with colour gradients
. drag/drop to re-order colour scale items, and swipe to remove
4.7.20:
. new drag/drop functionality in the main settings page to allow you to change the order of the sections
. swipe sections left/right to remove them entirely
. re-instate removed sections in the General Settings section

version 4.7.17

4.7.17:
. new option to choose which providers you want to appear in the various drop-down menus for choosing provider
. reduce clutter by deselecting those you are not interested in
. look in the Weather Data Provider section
4.7.16:
. on the settings page, show the section's icon in red when that variable is enabled but is not available from your chosen provider
4.7.14:
. new data source by popular demand... Foreca!
. 14 days of data (hourly resolution for 7 days, then three-hourly)

version 4.7.15

4.7.15:
. option in Time Settings to trim time range with no data (the default)
. when shifting the time range using the widget buttons, it can be useful to shift by the full amount even if the final time range is partially blank, to maintain the expected time range showing in the chart
4.7.14:
. new data source by popular demand... Foreca!
. 14 days of data (hourly resolution for 7 days, then three-hourly)
. first three hours has 15-minute resolution, and is updated several times per hour

version 4.7.14

4.7.14:
. much-requested new data source... Foreca !!
. requires platinum or API token to access this source
. has 14 days of data, with hourly resolution for the first 7 days, then three-hourly resolution
. the first three hours has 15-minute resolution, and is updated by Foreca several times per hour, thereby improving accuracy
. note that the data is subject to caching in this app unless the Cache Bust feature is used
4.7.10/11:
. new free data sources: here.com and Open-Meteo.com

version 4.7.13

4.7.13:
. prevent the app popping to the foreground again when dismissing a window opened from the widget (if the app was only put to the background previously rather than actually closing)
4.7.11:
. new free data source: Open-Meteo.com
. UI improvement: mark the currently-selected favourite in the favourite locations dialog
4.7.10:
. new free data source: here.com
. remove unnecessary permissions

version 4.7.12

4.7.12:
. updated internal dependencies
4.7.11:
. new free data source: Open-Meteo.com
. UI improvement: mark the currently-selected favourite in the favourite locations dialog
4.7.10:
. new free data source: here.com
. remove unnecessary permissions
4.7.9:
. fix bug in the country code field
. remove maps dependency
4.7.8:
. fix for custom colour settings not showing for header warning group
4.7.7:
. enable choice of primary/secondary data provider for "fog" and "cloudiness by height"

version 4.7.11

4.7.11:
. new free data source: Open-Meteo.com
. minor UI improvement: mark the currently-selected favourite (if any) in the favourite locations dialog
4.7.10:
. new free data source: here.com
. remove unnecessary permissions
4.7.9:
. fix bug in the country code field
. remove maps dependency
4.7.8:
. fix for custom colour settings not showing for header warning group
4.7.7:
. enable choice of primary/secondary data provider for "fog" and "cloudiness by height"

version 4.7.10

4.7.10:
. new free data source: here.com
. remove Advertising ID permission... was added automatically when updating the app to Android 12... not needed in this app
4.7.9:
. fix bug where the country code field in the Location section was being populated with the longitude
. remove maps dependency
4.7.8:
. fix for custom colour settings not showing for header warning group
4.7.7:
. enable choice of primary/secondary data provider for "fog" and "cloudiness by height"

version 4.7.9

4.7.9:
. fix bug where the country code field in the Location section was being populated with the longitude
. remove maps dependency
4.7.8:
. fix for custom colour settings not showing for header warning group
. minor styling tweaks
. internal dependency updates
4.7.7:
. enable choice of primary/secondary data provider for "fog" and "cloudiness by height"
4.7.6:
. updated translations (mainly Spanish)
4.7.5:
. fix settings page glitch where section content sometimes fails to show

version 4.7.8

4.7.8:
. fix for custom colour settings not showing for header warning group
. minor styling tweaks
. internal dependency updates
4.7.7:
. enable choice of primary/secondary data provider for "fog" and "cloudiness by height" variables
4.7.6:
. updated translations (mainly Spanish)
4.7.5:
. fix settings page glitch where section content sometimes fails to show
4.7.3/4:
. updated dependencies (e.g. Material 3 styling)

version 4.7.7

version 4.6.1

4.6.1:
. option to add a "trend line" to the temperature plots (actual, feels like, dewpoint, ground temperature)
. the time range for the trend line is set in the Common Temperature Settings section (so the trend can be based on more than just the visible data and less than the entire data)
. option in General Settings to disable progress messages in the widget for routine (auto) updates or manual updates (e.g. top-left update or resize)... now disabled by default for routine (auto) updates

version 4.5.1

4.5.1:
. option (in Chart Style section) to choose whether to show or hide zero-value daily precipitation/snow labels
. separate header option for wind gust (no need to have it enabled in the chart)
previous:
. new global model choice from DWD: ICON GLOBAL
. new variable: Snow Depth (DWD ICON models)
. new variables (DWD ICON-EU/D2): Lightning Potential Index (LPI) and Convective Available Potential Energy (CAPE)
. AIX weather widget preset

version 4.5.0

4.5.0:
. new global model choice from DWD: ICON GLOBAL (platinum only)
. new variable: Snow Depth (available from the DWD ICON models)
previous:
. new variables (DWD ICON-EU/D2 only): Lightning Potential Index (LPI) and Convective Available Potential Energy (CAPE)
. list the various models (e.g. ICON-EU, ARPEGE, HIRLAM) as separate providers
. improved precipitation daily totals labels
. show twilight stages: actual, civil, nautical, astronomical
. preset to mimic AIX weather widget

version 4.4.10

4.4.10:
. new variables (DWD ICON-EU/D2 only): Lightning Potential Index (LPI) and Convective Available Potential Energy (CAPE)
. list the various models (e.g. ICON-EU, ARPEGE, HIRLAM) as separate providers in their own right
. this enables them to be selected directly from the various provider lists e.g. directly from the widget button
previous:
. improved precipitation daily totals labels
. show twilight stages: actual, civil, nautical, astronomical
. preset to mimic AIX weather widget

version 4.4.9

4.4.9:
. fix missing alpha and hue sliders in colour picker on first opening
previous:
. option to show precipitation daily totals in same style as min/max labels
. allow default gridline spacing to be *reduced* as well as increased
. two-stage location permission request for Android 11
. "update widget in foreground" and "active location detection"
. complete Czech translation
. show twilight stages: actual, civil, nautical, astronomical
. preset to mimic AIX weather widget

version 4.4.7

4.4.7:
. internal cleanup (remove redundant widget refresh triggers)
previous:
. allow default gridline spacing to be *reduced* as well as increased
. two-stage location permission request for Android 11
. "update widget in foreground" and "active location detection"
. complete Czech translation
. widget auto updating improvements
. show twilight stages: actual, civil, nautical, astronomical
. preset to mimic AIX weather widget

version 4.4.3

4.4.3:
. two-stage location permission request for Android 11 (as required)
. "update widget in foreground" option in Advanced Settings section (no background location permission then required for widget updates, but notification shows)
. "active location detection" option in Advanced Settings section
. completed Czech translation
. improvements to widget auto updating
previous:
. show twilight stages: actual, civil, nautical, astronomical
. new preset to mimic look of AIX weather widget

version 4.4.2

4.4.2:
. new "chart spacing" option (in Chart Style section) to increase space between edge of widget/app and the chart content
. added one-click option set to recreate the look of AIX weather widget (in Predefined Option Sets)
. fix for inconsistent widget auto updating on some devices
. show warnings at top of settings page where system settings may affect widget updating
4.4.1:
. show twilight stages and timings on the chart (including header): actual, civil, nautical, astronomical

version 4.4.0

. new pro/platinum option to add coloured bands on the chart to show different twilight stages of sunrise and sunset: actual, civil, nautical, astronomical
. useful for photographers and in countries having short daylight but long twilight
. enable these twilight bands in the "Sunrise and Sunset" section
. can also show exact twilight timings on the chart by enabling "Sunrise and Sunset Lines" in the same section
. option also to show exact twilight timings in the Header Information section

version 4.3.12

4.3.11:
. expose account hash (in General Settings section) so that it can be copied and used as the API token on the api.meteograms.com page (for platinum users)
. add link to privacy policy in the App Info section
. make "detect location" the default for new installs
. change location permission request workflow
. updated Russian translations
recent:
. colour overlay to compare today's temperature with yesterday's
. option to increase/decrease y-axis grid line spacing

version 4.3.10

4.3.10:
. option to show a colour overlay to compare today's temperature with yesterday's
. allows you to get a quick feel for whether today will be colder or warmer than yesterday
. will take time for first 24 hours to populate for a new location
4.3.1-9:
. option to increase/decrease the y-axis grid line spacing
. colour scale for dew point and ground temp
. Ground Temperature
. ICON-EU, COSMO-D2 and ICON-D2 (DWD)
. AROME and ARPEGE (Météo-France)
. HIRLAM and HARMONIE (FMI)

version 4.3.8

4.3.8:
. internal performance enhancements
4.3.7:
. option to enable "standard colour scale" for dewpoint and ground temperature lines
4.3.1-6:
. new variable: Ground Temperature (from ICON-EU and COSMO-D2 models only)
. new weather models: ICON-EU, COSMO-D2 and ICON-D2 (from DWD)
. new weather models: AROME and ARPEGE (from Météo-France)
. new weather models: HIRLAM and HARMONIE (from FMI)

version 4.3.7

4.3.7:
. option to enable "standard colour scale" for dewpoint and ground temperature lines
4.3.1-6:
. new variable: Ground Temperature (from ICON-EU and COSMO-D2 models only)
. new weather models: ICON-EU, COSMO-D2 and ICON-D2 (from DWD)
. new weather models: AROME and ARPEGE (from Météo-France)
. new weather models: HIRLAM and HARMONIE (from FMI)

version 4.3.6

4.3.6:
. new variable: Ground Temperature (from ICON-EU and COSMO-D2 models only)
4.3.5:
. new weather models: COSMO-D2 and ICON-D2 (from DWD)
. covering Germany and neighbouring countries e.g. Austria, Switzerland, Benelux, France and Italy
. COSMO-D2 has a resolution of 2.2 km
. ICON-D2 will later replace COSMO-D2
. new model: ARPEGE (Météo-France), covering Europe with a resolution of 11 km
4.3.1-4:
. new models: ICON-EU (DWD), AROME (Météo-France) and HIRLAM and HARMONIE (FMI)

version 4.3.5

4.3.5:
. new weather models: COSMO-D2 and ICON-D2 (from DWD)
. COSMO-D2 covers mainly Germany but also extends to neighbouring countries like Austria, Switzerland, Benelux and some of France and Italy
. COSMO-D2 has a resolution of 2.2 km up to 45 hours ahead
. ICON-D2 will later replace COSMO-D2
. also a new Météo-France model: ARPEGE, covering Europe up to 114 hours ahead with a resolution of 11 km
4.3.1-4:
. new models: ICON-EU (DWD), AROME (Météo-France) and HIRLAM and HARMONIE (FMI)

version 4.3.4

4.3.4:
. new data source: Météo-France (AROME model)
. covers much of Europe (all of France, Germany, Benelux, Austria, Switzerland and Ireland, as well as much of Spain, Portugal, Italy and the UK)
. the AROME model used by this source has a very high spatial resolution, using a grid spacing of just 1.3 km, and provides an hourly time resolution up to around 36 hours ahead
4.3.1-2:
. new ICON-EU source (from DWD)
. new HIRLAM and HARMONIE sources (from the Finnish Meteorological Institute)

version 4.3.2

4.3.2:
. new DWD data source: ICON-EU, covering the whole of Europe
. this model has a high spatial resolution, using a grid spacing of 6.5 km
. the existing DWD model (MOSMIX) is based on ICON-Global (grid spacing of 13 km) and ECMWF
. due to the amount of server resource and processing required, this is a platinum-only source
4.3.1:
. new free provider: Finnish Meteorological Institute (FMI) with two model choices: HIRLAM and HARMONIE
. The Weather Company now has up to 15 days of data

version 4.3.1

4.3.1:
. new provider: Finnish Meteorological Institute (FMI)
. two models to choose from: HIRLAM and HARMONIE
. HIRLAM covers all of Europe (plus a little)
. HARMONIE covers the Nordic region (plus a little)
. string replacement (search and replace) feature for weather summary in header, to remove useless text (e.g. to replace "Expect dry conditions over the next six hours" with just "dry for six hours")
. and also for the provider text (e.g. change "weat" to "TWC" or even just "wx")

version 4.2.5

4.2.5:
. warning threshold options for feels like and dew point
. option (in Time Settings section) to centre day labels within their respective days
. new custom date format codes: use %q for S M T W T F S and %Q for Su Mo Tu We Th Fr
4.2.1-4:
. option to show a label for the "now" point
. alternative to showing the "now" value in header
. "alerts bar" feature (platinum only)
. accuweather data source shows up to 72 hours of data
. additional background colour for just the plot area

version 4.2.4

4.2.4:
. option to show a label for the "now" point
. this is effectively an alternative to showing the "now" value in the header
. doing this enables "now" values to be shown even if you are not using a header at all
. to prevent overlapping labels as a result, disable the "overlapping labels" option in Chart Style
4.2.1-3:
. additional background colour for just the plot area
. "alerts bar" feature (platinum only)
. accuweather data source shows up to 72 hours of forecast data

version 4.1.0

4.1.0:
. allow user to grant location permission "only when using the app" if only using the app and not the widget
. granting location permission "all the time" (in the background) is required for a widget since there is no app running in the foreground when the widget updates
4.0.1:
. change background colour of fullscreen widget using the "canvas layer" setting
. settings exported from the app can be imported into API page at api.meteograms.com
4.0.0:
. remove storage-related permissions

version 4.0.1

4.0.1:
. background colour of fullscreen widget can be controlled by way of the "canvas layer" colour setting in the Chart Style section
. settings exported from the app can now be imported into the API page at api.meteograms.com (where you can generate a meteogram online with the same style as the app)
. and settings exported from the API page can be imported back into the app... it's now a two-way process
4.0.0:
. remove all storage-related permissions

version 3.12.2

3.12.2:
. fix for shift function not working when set to "do not revert"
3.12.1:
. fix for occasional blank widget
. fix for adding multiple locations to favourites
3.12.0:
. single slider for setting chart hours range, with two slider controls
. option to enable viewing of all available data in full screen (including historical) even if not shown in widget
. fix for using the left/right middle "shift" buttons and then saving settings would make shifted time permanent

version 3.12.0

3.12.0:
. single slider for setting chart hours range, with two slider controls
. option to enable viewing of all available data in full screen mode (including historical), even if not shown in the widget
. fixed issue where using the "time shift" widget buttons and then saving settings would make the shifted time permanent
. a manual top-left refresh will now cancel the shift timer and revert to original time range
. single/double finger pan option in Advanced Settings section

version 3.11.4

3.11.4:
. drop-down list of providers within each weather variable section now shows only those providers that can actually provide that weather variable
. fix overlap of actionbar with chart in app (particularly in landscape orientation)
. general performance improvements under the hood
. weatherbit is also back up and running after a period of downtime
3.10.0:
. option in Time Settings section to show full days (from midnight to midnight)

version 3.10.0

3.10.0:
. option in Time Settings section to show full days (from midnight to midnight)
. this provides a fixed time window of an integer number of full days, optionally starting on a *previous* day
. note that any data from the past must be collected over time, and will not be available immediately for a new location
. as time goes on, this historical part of the chart should fill up for your chosen location
. may not work yet for all data providers

version 3.9.0

3.9.0:
. trial of new weather data provider (requires platinum): ClimaCell
. new pollen variables (data from ClimaCell): tree pollen, weed pollen and grass pollen
. note that pollen data is not available for all locations
. new Air Quality Index (AQI) variable (data from ClimaCell)... plot AQI forecast (not just value in header)
. fix message shown in weather variables sections when paid provider is selected and legacy credits still remain

version 3.8.13

3.8.13:
. new option in the Common Temperature Settings section to set a minimum overall range for the axis when using a variable scale (to ensure that small fluctuations do not appear large)
. make slider UI elements full-width (easier to set associated values more accurately)
. fix language used for settings page and for widget button text (was still sometimes reverting to device language even with a manual language override)
. fix incorrect colouring of some symbols in section headings

version 3.8.12

3.8.10-12:
. bugfixes and internal improvements
3.8.9:
. fix crash on clicking help link
. fix language change in settings (was always using device language)
. internal improvements
3.8.8:
. fix problem with widget updating
3.8.7:
. fix widget buttons for widgets with rotation enabled
3.8.6:
. can set a time window for the "warnings" in the Header Info section
. "show warning above" setting in precipitation probability section
. search box added to map-based place picker

version 3.8.9

3.8.9:
. fix crash on clicking help link
. fix language change in settings (was only using device language not language override)
. internal improvements
3.8.8:
. fix problem with widget updating experienced by some users
3.8.7:
. fix widget buttons for widgets with rotation enabled
3.8.6:
. can set a time window for the "warnings" in the Header Info section
. "show warning above" setting in precipitation probability section
. search box added to map-based place picker

version 3.8.7

3.8.7:
. fix widget buttons for widgets with rotation enabled
3.8.6:
. can set a time window for the "warnings" in the Header Info section (set to zero to use whole meteogram range)
. "show warning above" setting in precipitation probability section
. search box added to map-based place picker, so can use a combination of text search and map search
. bottom panel of map-based place picker follows app day/night theme

version 3.8.6

3.8.6:
. set a time window for the "warnings" in the Header Info section (set to zero to use the whole meteogram range)
. "show warning above" setting for the precipitation probability variable
. search box added to map-based place picker, so can use a combination of text search and map search
. fix map picker bug (selected location not sticking)
. bottom panel of map-based place picker follows app day/night theme

version 3.8.5

3.8.5:
. dark/light map theme for Map Picker in Location section which follows app theme
. internal improvements to widget updating reliability for locally-generated widgets
. widget button text on a rotated widget is now rotated correctly
. the two action buttons in the settings page slide up when snackbar message appears

version 3.8.4

3.8.4:
. option in temperature part of Header Information section to display min and/or max for next 24 hours (relative to start of chart)
3.8.1:
. slider controls for changing "line width", "fill opacity", "padding", and more
3.8.0:
. more consistent styling and improved handling of night/day mode
3.7.14:
. use the truncated location name in the notification as well as in the meteogram header itself
. option to include a meteogram in the notification... visible in smart watch notification

version 3.8.2

3.8.2:
. internal changes (widget auto updating)
3.8.1:
. slider controls for changing "line width", "fill opacity", "padding", "arrow size", "hours", "z index" values (and more)
3.8.0:
. more consistent styling and improved handling of night/day mode
3.7.14:
. use the truncated location name in the notification as well as in the meteogram header itself
. option to include a meteogram in the notification... should be visible in smart watch notification

version 3.8.1

3.8.1:
. slider controls for changing "line width", "fill opacity", "padding", "arrow size", "hours", "z index" values (and more)
3.8.0:
. more consistent styling and improved handling of night/day mode
3.7.14:
. use the truncated location name in the notification as well as in the meteogram header itself
. useful when the notification is displayed on a smart watch with limited screen space
. option to include a meteogram in the notification... should be visible in smart watch notification

version 3.8.0

3.8.0:
. overhaul of UI elements
. more consistent styling
. improved handling of night/day mode
3.7.14:
. use the truncated location name in the notification as well as in the meteogram header itself
. useful when the notification is displayed on a smart watch with limited screen space
. option to include a meteogram bitmap in the notification... should be visible in smart watch notification

version 3.7.11

3.7.11:
. prevent flash of light theme before loading dark
. improvements to widget auto updating
previously:
. new "system" option for "app theme" so that dark mode is controlled based on system setting
. truncate weather alerts in header
. irradiance type: direct, global, average, relative, net
. KNMI source
. Carbon Intensity
. MeteoGroup source with:
. cloud base height, freezing rain and convective precipitation probabilities
. snowfall probability, freezing level, snow altitude

version 3.7.10

3.7.10:
. new "system" option for "app theme"... to use dark/light mode (for the settings page) based on the system setting
3.7.9:
. improvements to widget auto updating
3.7.8:
. truncate weather alerts text in header
3.7.5:
. irradiance type: direct, global, average, relative, net
. cloud base height, freezing rain and convective precipitation probabilities
3.7.4:
. KNMI source
3.7.2-3:
. Carbon Intensity
3.7.0:
. MeteoGroup source
. snowfall probability, freezing level, snow altitude

version 3.7.8

3.7.8:
. option to truncate weather alerts text in header to save space
3.7.6:
. bugfixes
3.7.5:
. select irradiance type: direct, global, average, relative, net
. new variables: cloud base height, freezing rain probability, convective precipitation probability
3.7.4:
. KNMI data source
. set METAR station ID directly
3.7.2-3:
. Carbon Intensity variable
3.7.0:
. MeteoGroup data source
. new variables: snowfall probability, freezing level, snow altitude

version 3.7.6

3.7.6:
. fix auto update issue experienced by some
. fix location permission denied message
3.7.5:
. select irradiance type (MeteoGroup): direct, global, average, relative, net
. new variables (MeteoGroup): cloud base height, freezing rain probability, convective precipitation probability
3.7.4:
. KNMI data source
. set METAR station ID directly
3.7.2-3:
. Carbon Intensity variable
3.7.0:
. MeteoGroup data source
. parameters: snowfall probability, freezing level, snow altitude

version 3.7.5

3.7.5:
. select irradiance type (with MeteoGroup as data source): direct, global, average, relative, net
. new variables (MeteoGroup only): cloud base height, freezing rain probability, convective precipitation probability
3.7.4:
. weather data provider: KNMI
. set METAR station ID directly
3.7.2-3:
. Carbon Intensity variable
3.7.1:
. font size option for wind arrows blocks
3.7.0:
. MeteoGroup data source
. parameters: snowfall probability, freezing level, snow altitude

version 3.7.4

3.7.4:
. new weather data provider: KNMI (Netherlands and nearby only)
. new option to set the METAR station ID directly
3.7.2-3:
. new Carbon Intensity variable
. bugfix for favourite locations not being preserved when saving/loading settings
3.7.1:
. font size option for wind values in wind arrows block
. failure message identifies problem data source
3.7.0:
. trial of MeteoGroup data source
. new parameters: "snowfall probability", "freezing level", "snow altitude"

version 3.7.3

3.7.2-3:
. new Carbon Intensity variable
. bugfix for favourite locations not being preserved when saving and loading settings back
. bugfix for meteogram not loading with long header and colour notifications enabled
3.7.1:
. font size option for wind values in wind arrows block
. failure message identifies problem data source
3.7.0:
. trial of MeteoGroup data source
. new parameters: "snowfall probability", "freezing level", "snow altitude"
. truncate header weather summary

version 3.7.2

3.7.2:
. new Carbon Intensity variable (UK only)
. bugfix for meteogram not loading with long header and colour notifications enabled
3.7.1:
. font size option for wind values in wind arrows block
. failure message identifies problem data source
3.7.0:
. trial of weather source: MeteoGroup
. new parameters: "snowfall probability" and "freezing level"
. or "altitude above which snow is certain"
. or "altitude below which no snow is possible"
. truncate header weather summary

version 3.7.1

3.7.1:
. font size option for wind values in wind arrows block
. warm and cold colour options for "freezing level" parameter in header
. new loading screen for app
. fetch failed message states which data source is the cause
3.7.0:
. trial of new weather source: MeteoGroup
. new parameter: snowfall probability
. new parameter: freezing level (altitude)
. or altitude above which snow is certain
. or altitude below which no snow is possible
. truncate the weather summary in the header

version 3.7.0

3.7.0:
. trial of new weather source: MeteoGroup
. new parameter: snowfall probability
. new parameter: freezing level (height at which there is a transition from below freezing to above freezing)
. or instead choose from one of the following similar parameters:
. --- level above which snow is certain
. --- level below which no snow is possible
. truncate the weather name in the header to save space
. option to display warning in header if snow amount is above stated threshold

version 3.6.0

3.6.0:
. new thunderstorm and hail probability variables
. option to truncate location name in header to save space
. option to perform string replacements in header location name (e.g. to shorten "Saint" to "St")
. button in Manage Defaults section to clear defaults
. put your own historical data (e.g. from your own weather station) in the meteogram!
. specify the URL in the Time Settings section (first set "start at" to negative value)
3.5.0:
. trial of new weather source: MeteoGroup

version 3.5.0

3.5.0:
. trial of new weather data provider: MeteoGroup
3.4.0:
. show header information from widget in notification
. clicking on notification opens fullscreen meteogram
. option for whether or not to include meteogram in notification
. option to set background colour in notification
. remove wasted space in notification
. option to show moon phase as a percentage value in the header
. save and load settings to/from the clipboard
. time zone correction setting in Advanced Settings

version 3.3.0

3.3.0:
. choose from 16 different "slots" into which to save your settings on the server
. (this allows multiple different setting groups to be stored on the server)
. "ignore location" checkbox control for both saving and loading settings
. (if ticked when loading settings, existing location settings are preserved)
. user-defined defaults (if any) are now used when creating a new widget
. new "Online Editor" button in Server section and new "Load from URL" button in Save/Load section

version 3.2.12

3.2.12:
. new index values to set the order of header items... as explained at https://trello.com/c/r1argZcP
. new "float right" header item... use this after the location name to return the header formatting to what it was originally (with location to the left and the rest to the right)
. new "spacer" header element... a fixed-width spacer when you want to space two items apart
. new header option to show the visibility variable

version 3.2.11

3.2.11:
. general improvements to header text positioning
. new option to centre the text within the header
. new option to change the size (scale factor) of the moon phase symbol
3.2.10:
. apply bolder font weight to header text
. colorise header variables individually
3.2.9:
. disable display of units in the header
. added a "warn above" option for wind speed gust
3.2.6:
. show wind direction in header

version 3.2.6

3.2.6:
. option to show wind direction (either angle or compass name or both) in the header
. fix location permissions for Android 10 (Q): when using "detect location" access is needed to location whilst in the background to enable auto updating of a widget
3.2.5:
. new weather data provider: The Weather Network
3.2.3:
. new weather data provider: Weatherbit
3.1.0:
. new *global* data provider: UK Met Office

version 3.2.5

3.2.5:
. new weather data provider: The Weather Network
3.2.3:
. new weather data provider: weatherbit.io
. "window" option for the precipitation min/max labels to bring it in line with other series
. display labels per 24 hours, per chart, per day/night, or based on significant turning points
. in addition, the column type for precipitation now works even for a non-linear time axis
. internal performance enhancements
3.1.0:
. new *global* data provider: UK Met Office

version 3.2.1

3.2.1:
. the Dark Sky data now provides minute-by-minute time resolution for precipitation for the first hour
. this first-hour forecast is updated every 5 minutes by Dark Sky for up-to-date short-term rainfall predictions
. to be most effective, display a small number of hours and use the "cache bust" add-on
3.2.0:
. new "cache bust" add-on (in-app upgrade)
3.1.0:
. new *global* data source: UK Met Office

version 3.2.0

3.2.0:
. new "cache bust" add-on (in-app upgrade)
. when enabled, the meteogram will receive fresh forecast data direct from the provider with every refresh, bypassing the usual cache
. this will be more or less effective depending on the provider's own model update frequency
. note that a top-left corner manual widget refresh will also "cache bust", but to a lesser extent
3.1.0:
. new *global* data source: UK Met Office
3.0.0:
. new pricing structure: see bit.ly/meteogram3 for details

version 3.1.0

3.1.0:
. new global data source: UK Met Office (choose metoffice.com not metoffice.gov.uk from the list)
. this new source has global coverage for up to seven days (168 hours) ahead
. bugfixes, updated support libraries
3.0.2:
. choose location by map
3.0.1:
. trial of new data provider: Aeris Weather
3.0.0:
. new pricing structure: see bit.ly/meteogram3 for details
. "mix-and-match" is now available to free users
. location search works for devices without Google Play Services

version 3.0.2

3.0.2:
. the ability to choose location by map is back (in a different form)
. fix colouring of section header symbols
3.0.1:
. trial of new data provider: Aeris Weather
. bugfixes
. update support libraries
3.0.0:
. new pricing structure: see bit.ly/meteogram3 for details
. "mix-and-match" is now available to free usersvariables
. location search (autocomplete) should work for devices without Google Play Services
. fixed incorrect country code returned from location search

version 2.2.32

2.2.32:
. show elevation and/or azimuth for a planet of your choice
. bugfixes and update to use newer support library versions
2.2.31:
. when the toolbar is hidden in the app (or fullscreen widget) the button on the chart is now a MENU button for showing the same menu that is available from the (now hidden) toolbar
. new option to show current cloudiness value in the header
2.2.27-30:
. mix and match... choose what data provider to use on a per-variable basis (pro version only)

version 1.11.5

1.11.5:
• prevent resetting of account every time settings are loaded from file or server
• internal changes in preparation for server migration
1.11.4:
• simplified font options: there is now a single set of font options rather than separate sets for webfonts
• plus a wider range of font weights is now available for some of the fonts
• separate widget dimension correction factors for portrait and landscape
• option to disable auto opening of Predefined Option Sets section
• bugfixes

version 1.9.61

1.9.61:,• new fill option for feels like and dewpoint lines (with optional gradient effect),• new options to fill space between actual temperature line and feels like and/or dewpoint temperature lines,• the latter allows a nice visualisation of how feels like and/or dewpoint differ from actual temperature,1.9.60:,• fill option for the temperature line (with optional gradient),• wind *gust* info for met.no (Norway and nearby),1.9.59:,• gradient option for the fill under certain lines